Wall Protection Aluminium Panel Trim 2.5mm Thickness OEM Available

Wall Protection Aluminium Board Trim Internal Corner UV Panel Decoration

Application

After the initial cleaning and protective programme has been adopted for anodised surfaces, (as outlined in the external applications section), a regular wipe over with a soft cloth, to remove finger marks and dirt deposits will maintain the lustre of anodised aluminium indefinitely.


Feature

• Finish - Chrome
• Length 2400mm
• Material - Aluminium
• Suitable for 10mm PVC Panels
• Easy to maintain - simply wipe clean, no more mouldy grout
• Non porous and hygenic
• Suitable for domestic or commercial installations
• Ideal for both wet and dry areas
• Virtually maintenance free
• Can be cut to size easily

Use

Anodised finish

External applications

The smoothness and hardness of anodised surfaces makes for ease of cleaning. After product installation it is advisable to undertake the following procedure:

• Remove any grease or deposits with organic solvent, such as white spirit.

• Swab down with a diluted solution of mild detergent followed by rinsing with cold clean water.

• After drying, apply furniture cream or wax, to maintain the highest quality surface finish.As with mill finish aluminium, the frequency of cleaning anodised surfaces in the external environment will vary depending on atmospheric conditions. In severely polluted or marine environments cleaning on a regular basis is advised.Fascia claddings, shop fronts, profiles, etc, should be washed over every three months or so, to help maintain the integrity of surface finish.Anodised surfaces which have been neglected for considerable periods of time will often require a more aggressive cleaning procedure. Unfortunately, abrasive cleaning does cause some removal of the anodic film and the objective is to minimise the amount of abrasive cleaning to achieve the desired standard finish.

Specification